Project Image

UV Food Safe Inks

UV OFFSET INKS

Description

The inks of Excure series 30000M FOOD are especially developed for printing on offset machines.

Features

  • excellent printability
  • fast curing
  • good gloss, high colour strength
  • viscosity properties fit for offset printing
  • low odour and lowest migration properties
  • Optimal resistance properties will be obtained 24 hours after printing
  • Formulated without benzophenone
  • Formulated without ITX
  • Produced according to the Good Manufacturing Practices

Applications

  • All sheet fed and web fed offset printing machines equipped with a UV-curing system

Description

The inks STERAPLAST FOOD show very good adhesion on all possible closed substrates with low odour and low migration properties.

Features

  • Good adhesion
  • Excellent film lamination properties
  • Good ‘post-curing’ rate
  • Very good flexibility
  • Good lithographic properties
  • Good gloss, high colour strength
  • The STERAPLAST FOOD inks contain carefully selected raw materials to minimise the risk of skin irritation and causes as little odour as possible. It is in compliance with the EuPIA exclusion policy.
  • Low odour and low migration properties
  • Optimal resistance properties will be obtained 24 hours after printing
  • Formulated without benzophenone
  • Formulated without ITX

Application Area

  • Letterpress
  • Wet offset


UV FLEXO INKS

Description

The STERAFLEX FOOD inks are especially developed for printing on flexo machines with superb densities and excellent flow properties. These inks are characterised by very low odour and extreme low migration properties.

Features

  • excellent printability
  • fast curing
  • good gloss, high colour strength
  • viscosity properties fit for offset printing
  • low odour
  • Optimal resistance properties will be obtained 24 hours after printing
  • Formulated without benzophenone
  • Formulated without ITX
  • Extreme low migration

Applications

  • All flexo label and packaging printing machines equiped with a UV-curing system.

Description

The inks of Excure 20000AP series show very good adhesion on all possible closed substrates

Features

  • Applicable for indirect food contact
  • Excellent printability Fast curing
  • Good gloss, high colour strength
  • Viscosity properties fit for printing on UV Arpeco presses or similar printing presses
  • Low odour (according to organoleptic acceptance criteria and test methods in the Liquid Food Packaging Area)
  • Optimal resistance properties will be obtained 24 hours after printing
  • Following photoinitiators are not used in these ink formulations:
    - 1Hydroxycyclohexylphenylketone
    - 2.2-Dimethoxy-phenylacetophenone
    - 2.4-Diethyl-9H-thioxanthen-9-one
    - 2-Hydroxy-2-methylpropiophenone
    - 2-Methyl-4-(methylthio)-2-morpholinopropriophenone
    - 4-Benzoylbiphenol
    - 4-Hydroxybenzophenone
    - 4-Methylbenzophenone
    - Diphenyl-(2,4,6-trimethylbenzoyl)-phosphinoxid
    - Benzophenone
    -Ethyl-4-dimethylaminobenzoate (EDB)
    -Isopropylthioxanthone (ITX)

Applications

  • All Arpeco printing machines equipped with a UV-curing system.


EB OFFSET INKS

Description

The inks of Excure series 20000EB FOOD show very good adhesion on all possible closed substrates.

Features

  • Good adhesion
  • Excellent film lamination properties
  • Good ‘post-curing’ rate
  • The Excure 20000EB FOOD series contains carefully selected raw materials to minimise the risk of skin irritation and causes as little odour as possible. It does not contain raw material listed on CEPE or TSCA exclusion list
  • Low odour and low migration properties
  • Optimal resistance properties will be obtained 24 hours after printing
  • Formulated without benzophenone
  • Formulated without ITX

Applications

  • Letterpress
  • Wet offset

Description

The inks of Excure series 30000EB FOOD are characterised by a low residual odour. This makes the inks suitable for printing on the outside of food packaging.

Features

  • Suitable for printing on the outside of food packaging
  • Extra low in residual odour
  • Very high reactivity
  • Low migration properties
  • Optimal resistance properties will be obtained 24 hours after printing
  • Formulated without benzophenone
  • Formulated without ITX

Applications

  • Letterpress
  • Wet offset


UV METAL DECORATING

Description

The inks STERAPLAST FOOD show very good adhesion on all possible closed substrates with low odour and low migration properties

Features

  • Good adhesion
  • Excellent film lamination properties
  • Good ‘post-curing’ rate
  • Very good flexibility
  • Good lithographic properties
  • Good gloss, high colour strength
  • The STERAPLAST FOOD inks contain carefully selected raw materials to minimise the risk of skin irritation and causes as little odour as possible. It is in compliance with the EuPIA exclusion policy.
  • Low odour and low migration properties
  • Optimal resistance properties will be obtained 24 hours after printing
  • Formulated without benzophenone
  • Formulated without ITX

Applications

  • Letterpress
  • Wet offset

Contact Us

  • Address:18,kannabiran koil street, G.N.T Road, Kannakachatram, Chennai, Tamil Nadu 600060

  • Phone:+91-95512-75023

    Phone:+91-95512-75089

  • Email: [email protected]

Follow Us